Make the most of your cold plunge.

Thank you for purchasing AlphaTank Poseidon. Here is a guide covering everything you need to know to start enhancing your ice baths, maintain the chiller, and more.

If you have any questions, please get in touch with us at help@alphatank.com

what's included?

  • 1HP chiller/heater
  • Quick connect hoses
  • Pre-installed water filter plus two replacement filters
  • Filter housing wrench
  • Accessories bag

how to set it up.

Setting up Poseidon should take just around 10 minutes. Here's a step-by-step guide.

Step 1

install hoses.

Make sure your ice bath is empty.

Top to Top: Connect the green "Outlet" on Poseidon to the green "Water in" on Triton, or the top drain on the Zeno. Make sure the hose is screwed on tight.

Bottom to Bottom: Connect the red "Inlet" on Poseidon to the red "Water out" on Triton, or the bottom drain on the Zeno. Make sure the hose is screwed on tight.

To connect the hoses on the Zeno, you'll first need to connect the two "Quick Connectors"; screwing them between the hose and the drain valves.

Step 2

set up water filter.

Make sure the water filter on the side of Poseidon is screwed on tight, without any air leaking in or out. Optionally, you can use the wrench to help screw/unscrew the water filter, but hand tightening should be sufficient by default.

Filter maintenance instructions further down below.

step 3

add water & open valves.

Fill the pod or tub with water and optionally add ice. We recommend filling either AlphaTank ice bath to roughly 70% capacity.

step 4

turn on chiller.

Safety Test: plug Poseidon into a standard 120V power supply. There is a power switch on the back of the chiller. Make sure the power switch is switched up in the "on" position. The display of Poseidon should turn on (in case the chiller is connected to power, and the switch is turned to the "on" position. To conduct the safety test, press the orange button. This should turn the device off, and the switch should go down, into the "off" position. Only move forward if the test happened exactly like described above. Otherwise, please contact support.

Make sure the power plug is off the ground, in an elevated position, and away from water. Be sure not to handle the power plug with wet hands.

You are now ready to turn on and use Poseidon. To start the chiller, press the power button in the bottom right corner. Make sure the drain valves are open.

Step 5

cold plunge.

Once the desired temperature is achieved, TURN OFF AND UNPLUG THE CHILLER and only get into the ice bath once there is no electricity in the chiller.

After your cold plunge, you can reconnect Poseidon to power, and let it clean the water and set the correct temperature for your next session.

basic settings.

A quick list of the most basic functionality, and how to set it up.

set temperature.

Press the plus or minus buttons on the home screen of the chiller to adjust the temperature.

child lock.

Press and hold the the lock icon on the home screen until it locks/unlocks.

celsius & fahrenheit.

Press the Settings button on the bottom left corner of the home screen to navigate to the Settings page. Here you'll find the toggle to switch between Celsius and Fahrenheit.

set Ozone.

Navigate to the settings page by pressing the Settings button on the bottom left corner of the home screen. Press the plus and minus buttons to adjust the Ozone cleaning time. We recommend 1 minute as an ideal setting for most users.

wifi app.

Download the Tuya Smart app (iOS & Android). Turn on the chiller and click the settings key. Press WiFi icon for 3-5 seconds until the WiFi blinks. Open the Tuya Smart App on your phone and tap the "add device" plus icon. Enter you WiFi details, and you should be all set to connect to your chiller. You should automatically enter the App control panel.

need help?

Contact us at help@alphatank.com.

electricity warning.

This water chiller is powered by electricity and should be used with caution. To avoid electrical shock or injury, please turn off the chiller and disconnect it from electricity when using your ice bath. Do not touch the water chiller with wet hands or while standing in water. Always unplug the water chiller before cleaning, maintaining or servicing it. Keep the water chiller and ice bath away from children and pets.

WARNING!

Before using an ice bath, it is crucial to consult your healthcare provider, especially if you have underlying health conditions. It is your responsibility to ensure that the use of AlphaTank products is safe and appropriate for you. DO NOT USE if you have any underlying health concerns or health risks, are pregnant, under 18 years of age, have a pacemaker or a history of heart complications, heart disease, epilepsy, high blood pressure, recently had surgery, have open wounds or lesions, have experienced frostbite, neuropathy or retinal damage. Submerging in cold water can drastically reduce your body's central temperature as it causes your blood vessels to tighten and blood flow to decrease. This may increase blood pressure and raise the risk of cardiac arrest or stroke, especially if there are existing health concerns. Potential side effects of ice baths include, but are not limited to, rapid or irregular heartbeat, the immediate sensation of intense cold, allergic or anaphylactic shock, along with the risk of hypothermia, and frostbite. We strongly recommend consulting your healthcare provider and starting with short sessions (just a few minutes in the ice bath), gradually increasing the duration over time, without pushing your body beyond its limits. AlphaTank shall not be held liable and does not take any responsibility for any injuries, accidents, complications or property damage, including but not limited to water damage, resulting from the use of the AlphaTank products. It is your responsibility to take precautions while filling the ice bath products to check for air and water leaks. Please make sure to only fill these products with water in locations with sufficient drainage possibilities. Do not use AlphaTank indoors or on balconies, all AlphaTank products are designed for outdoor use only on solid ground or grass.

Don't let any children, or adults vulnerable to drowning, alone or in close proximity with any of our ice bath products, even if these products are not water-filled. Keep electronic devices away from the water.